Seeding machine SMART

The Smart 300 is universal seeding machine with 3m working width. The machine is primarily designated for permanent grassland foundation or recultivation, but it can be fully used in field conditions for seeding grain and majority of common crops. A seed is delivered directly into the ground by disc seeding unit and stabilized by roller afterwards. The seed drill machine SMART is highly universal equipment especially for smaller farmers. 

Standard machine version includes:

  • 200 liters seeding unit with hydraulically driven fan
  • Control box 1.2
  • Smooth cylinder (water fillable) with 510 mm diameter and 12mm thickness equipped with scraper
  • Hinge cat. III/2
  • Two rows of seeding units with distance 125 mm between each unit
  • Inter-row distance 125mm
Silentblocks for impact absorbing
Silentblocks for impact absorbing
Clips for easy roller setting
Clips for easy roller setting
Wires for the groove preparation
Wires for the groove preparation
Control box for automatic regulation depending on the speed and lifting
Control box for automatic regulation depending on the speed and lifting
Seeding units for sowing into the narrow groove
Seeding units for sowing into the narrow groove
Sowing shafts depending on the seeds
Sowing shafts depending on the type of seeds and dosed amount
Wires fixing
Wires fixing
Lifting sensor
Lifting sensor
8-16 sowing outlet
8-16 sowing outlet

300

Working width (mm)

2900

Transport width (mm)

3000

Length (mm)

1970

Weight (basic version) (kg)

Interline spacing (mm)

125

Available seeders volume (l)

200, 300, 500, 800

Working speed (km/h)

8-15

Rollers

Cast-iron roller type D540/570

ø Small disc 540 mm

ø Large dics 570 mm

ø Shaft 60 mm

Cast-iron roller type Z400/450 or Z500/550

ø Roller 500/550 mm

ø Shaft 50 mm

Rubber cylinder LT

ø 560 mm

Seeding unit

Seeding unit

Available volumes:

200, 300, 500, 800 l

Control boxes

Control box 1.2
Control box 5.2
Control box 6.2

Seeding unit -speed sensors

Speed sensors - 7-pin signal cable
Radar sensor
GPS sensor

Seeding unit - lifting sensor

Tractor linkage upper bar sensor

other

Calibraton button
Fill level sensor
News
SMS CZ in Portugal
14 September 2023

The Rokycany-based producer of agricultural machinery for soil, meadow and pasture processing, SMS CZ, is expanding its area of activity and entering into cooperation with a business partner in Portugal, where they will be used in a new segment of agriculture, which is the cultivation of nuts and dry fruits. SMS CZ machines were also presented to the Portuguese audience at the Agroglobal exhibition in Santarém.

SMS CZ - Kámen
14 September 2023

Autumn is here and with it a marathon of exhibitions and demonstrations featuring SMS CZ machines. Farmers in Portugal, France, Germany, Austria, Czech Republic, Hungary, Romania and Lithuania can look forward to it. You are cordially invited to all events.

FINISHER new
08 September 2023

From 13 September to 14 September, the agricultural exhibition Den Zemědělce will take place at the airfield near the village of Kámen u Pelhřimova. At the traditional event, SMS CZ will present a total of seven machines, with the premiere of the new generation of the FINISHER combined cultivator. Also on display will be the new TALON GREEN, subsoiler for meadows and pastures introduced a few days ago in České Budějovice.

CZ.01.1.02/0.0/0.0/15_019/0004523 - Nová technologie rafinace spalin a eliminace persistetních organických látek využitím odpadního sorbentu 

je spolufinancován Evropskou unií

Oveřená technologie: nová technologie rafinace spalin pro snižování kyselých plynů  a persistentních organických látek. Popoprovoz nové technologie rafinace spalin

CZ.01.1.02/0.0/0.0/15_019/0004522 - Nová nízkonákladová technologie pro katalytickou redukci oxidů dusíku ve spalinách určená pro malé a střední emisní zdroje

je spolufinancován Evropskou unií

Oveřená technologie nové katalytické metody snižování NOx ve spalinách. Návrh a konstrukce nové technologie DeNOx instalované na poloprovozní spalovací jednotce VŠB-TUO.

Výstavy 2017-2019

je spolufinancován Evropskou unií

Uchopit pozici na zahraničních trzích a snažit se získat a uchopit pozici na trzích, kde naše stroje ještě nejsou tolik známé.

Účast na zahraničních výstavách 2018-2020

je spolufinancován Evropskou unií

Udržet pozici na zaharaničních trzích, udržet podíl vývozu firmy na cca 70-ti procentech produkce a získavat trhy nové, aby mohlo dojít k vyrovnání případného poklesu kupní síly(vlivem stavu zemědělství a  dotací), v některé zemi kam vyvážíme.

Optimalizace strojně-technologického vybavení pro potřeby výrobních procesů nově vyvíjených a inovovaných produktů společnosti SMS CZ s.r.o.

je spolufinancován Evropskou unií

Inovace výrobních procesů a výroba inovovaných produktů